Se14 High Quality 50mn Worm Gear Solar Tracker Slewing Gear

Produktbeschreibung

Description

A slew worm drive system is a compactly constructed unit which consists of a slewing ring, base plate and worm. This unit brings the advantages of a slewing ring and a worm into one unit.

It is suitable for applications which demand slow rotation with a continuous or cyclical movement capable of handling combined loads. The product is with standard dimensions for coupling an electric or hydraulic motor as well as coupling a whole system to equipment.

Due to its compactness, high rigidity and other mentioned advantages, a worm drive system is used in varying equipment such as mobile assembly platforms, satellite system, hydraulic loading cranes on haulage vehicles, small marine cranes, extendable rotating ladders, in wheel units of large marine portal transporters.

Advantages

1. Rotation 360 degrees
2. Connection of a driving motor from the left or right side
3. During installation, it is not necessary to adjust the gearing clearance; this is already set by the producer before factory
4. Simple installation and low maintenance
5. Rational space utilization
6. The gear is self-locking; therefore a brake is not necessary
7. Easy and fluent method of starting and stopping

Parameters of SE Slewing Drive

Model	Ratio	Rated Output Torque (N.m)	Tilting Torque (N.m)	Holding Torque (N.m)	Axial Load (kN)	Radial Load (kN)	Efficiency	Precision (°)	Self-locking	Weight (kg)
1"	32:1	400	1000	1800	22	12	40%	≤0.1	Yes	6
3"	31:1	600	1500	3000	30	16	40%	≤0.1	Yes	8
5"	37:1	800	6000	9200	68	27	40%	≤0.1	Yes	12
7"	57:1	2000	13500	13200	132	58	40%	≤0.1	Yes	21
9"	61:1	4400	45000	30800	340	130	40%	≤0.1	Yes	49
12"	78:1	5800	54400	40560	480	190	40%	≤0.1	Yes	61
14"	85:1	6550	68000	54200	680	230	40%	≤0.1	Yes	63
17"	102:1	9400	135600	65040	980	390	40%	≤0.1	Yes	105
21"	125:1	16000	203400	81000	1600	640	40%	≤0.1	Yes	149
25"	150:1	21000	271160	89000	2400	950	40%	≤0.1	Yes	204

Planetary Gear Motors

Optional Items: Brushed DC motors (12V/24V/48V) with or without hall sensors, brushless DC gear motors, AC Motor(220V/380V), Encoder.