R&X MPPT 2kw Grid Tie inverter For Wind Generator Three Phase Input

Produktbeschreibung

Overview

Quick Details

Place of Origin:: Jiangsu, China

Brand Name:: R&X

Model Number:: RX-2000GTI-W

Input Voltage:: 45-90V DC

Output Voltage:: 185-265V output

Output Frequency:: 50/60HZ

Output Type:: Single

Size:: 4*20*9CM

Type:: DC/AC Inverters

Inverter Efficiency:: 95%

Certificate:: CE, CE ROHS

Warranty:: 25 Years, 5 Years

Weight:: 8.0kg

Application:: Home Appliance

Output waveform:: Pure Sine Wave Output

Inverter type:: On-Grid

Supply Ability

Supply Ability:: 100 Piece/Pieces per Week

Packaging & Delivery

Product Description

R&X MPPT 2kw Grid Tie inverter For Wind

Generator Three Phase Input

--With dump load controller and resistor / limiter sensor clamp

--Max Efficiency:>92%

--MPPT Efficiency:99%

--DC/AC 45V-90V ( optional )

--AC 220V 230V 240V 50hz 60hz

-- Power Limit sensor/clamp

Advantage Features of the 2G Wind Power Grid

Tie Inverter

•The 2nd Generation grid tie inverter, new technical , Higher efficiency

•Higher MPPT efficiency , Max 99%

•Multiple intelligent protection to ensure safe use.

•Directly connect to three phase wind turbine, without regulator

•Easy to install and easy to operate.

•UL1741, IEEE1547, VDE4105 standards .

•Two years Warranty , life time technical support .

•Pure Sine Wave output

•Build in dump load function

•Two years Warranty , life time technical support .

•Power Limit Function

R&X Grid Tie Power Inverter is the world's most technologically advanced inverter for use in utility-interactive applications.

This manual details the safe installation and operation of the R&X Grid Tie Inverter.

This integrated system maximizes energy harvest, increases system reliability, and implifies design, installation and management.

The small type wind grid tie power inverter can obtain the wind energy from wind turbine, and can tie to the grid through its output cables with no extra equipment. The installation is very convenient and reliable.

We call the system combining with small grid tie inverter and wind turbine as 'SGWT'. The system includes wind turbine and small grid tie inverter and installation kit, and some "SGWT" also will include controller, dump load resistor.

The inverter can be connected to any outlets of utility grid at house. The small grid tie inverter monitors the volume, frequency and phase of the home utility grid, then produce pure sine wave AC power that the frequency and phase are as same as the grid's, and the volume is a bit higher than the grid's, then according to the current controlled PWM, to control the output power to the grid.

The small grid tie inverter just puts out power when the home grid is on.

When the wind turbine is rotating, and the output of the voltage is in the range of the rated input voltage of the inverter, the wind turbine will produces power, and the grid tie inverter will change the power from wind turbine to the home grid. When the total power of electric apparatus that are using in the house is larger than the output power of the inverters, these power from the inverters will be consumed in the house, this will slow down the power meter, otherwise, the difference of the output power of the inverter between the total used power of the apparatus will go out from the house to the out grid

Technical Data

Input Voltage Range	45-90vdc (test point is at the output of the inside rectifier)
Max input DC voltage	90v
Peak power tracking voltage	50-90v
Max output power	2000w
Nominal output Voltage	230v
Nominal Voltage Range	185-265v
Frequency Range	47.5-51.5 for 50hz,59.3-60.5 for 60hz
Power Factor	>0.95
Output Waveform	pure sine wave
Max Efficiency	>92%
MPPT Efficiency	99%
Product size	434x196x88mm
Carton size	4535x325x360 mm
Display	LCD
Packaging	Carton
Net weight	7.5kg
Gross weight	8.0kg
Approval /Cerficate	UL1741,IEEE1547,VDE4105/CE

Detailed Images

Selecting correct model of Grid Tie Inverter.

If the wind turbine is DC output type, then you should choose WDL model inverters, and the input DC voltage range of the inverter should fit the DC output voltage of the wind turbine, the rated power of the inverter should also fit the max. power of the wind turbine, and the AC output of the inverter should fit the standard of AC utility grid.

If the wind turbine is AC output type, then you should choose WAL model inverters. Most factories don't supply the AC rated voltage, just supply DC rated voltage, so our WAL also supply the DC input range, please check the DC rated voltage of wind turbine should fit the DC input range of the grid tie inverter.

Inverter LCD Display :

Lieferfähigkeit

Verpackung und Versand

Vorlaufzeit:

Hafen:

Verpackungsdetails:

>=1 pieces

US 320.00

US {-{

Details anzeigen