PMSM PUMP Submersible pump 1.5kw 2HP 110V 220V DC input solar pump inverter

Produktbeschreibung

Overview

Quick Details

Supply Ability

Packaging & Delivery

Products Description

1. MPPT efficiency more than 99%.

2. Drives well all 1/3 phase AC pumps and PMSM in solar pumping system. 3. Voc of solar panel can set by manual or MPPT automatically tracking.

4. Solar DC & Grid AC power supply input both ok.

5. Dry run(no need sensor) & Full water tank protection.

6. Short circuit, over load, over current... motor production.

7. The PQ (power/flow) performance curve enables calculating the flow output from the pump

8. Ambient temperature for using: -10 to +50˚C.

9. Inverter Power range: 220V, 0.75KW to 110KW. 380V/480V, 0.75KW to 250kw

Input power: 150VDC-450VDC or 220VAC.

Output: 1/3phase 220VAC

0.75KW, 1.5KW, 2.2KW, 4KW.

Input power: 250VDC-800/900VDC or 380/480VAC

Output: 3phase 380-480VAC

0.75KW, 1.5KW, 2.2KW, 4KW.

SG600 solar pump inverter.

Input power: 250VDC-800/900VDC or 380/480VAC
Output: 3phase 380-480VAC
5.5KW, 7.5KW, 11KW, 15KW.

Input power: 250VDC-800/900VDC or 380/480VAC
Output: 3phase 380-480VAC
18.5KW, 22KW, 37KW, 45KW,

55KW, 75KW, 93KW, 110KW,

132KW, 160KW, 250KW.

Input voltage range	80V to 450VDC input, 3PH 110VAC output, 1S model 150V to 450VDC input, 3PH 220VAC output, 2S/2T model 250V to 800/900VDC input, 3PH 380/440/480VAC output, 4T model
Recommended input voltage (Voc and Vmp)	Voc 180VDC, Vmp 155VDC for 1S model & 110VAC pumps Voc 370VDC, Vmp 310VDC for 2T model & 220VAC pumps Voc 650VDC, Vmp 540VDC for 4T model & 380VAC pumps
Motor type	Control for permanent magnet servo motor and asynchronous motor pumps.
Input power	DC power from solar arrays or AC grid power
Maximum DC power input	450VDC for 220AC output & 800/900VDC for 380V AC output, (900V needs remark)
Rated output voltage	Single phase 220V, 3-phase 220V/380V/480V
Output frequency range	0~50/60Hz (0-400HZ for PMSM)
MPPT efficiency	99.6%,
Ambient temperature range	G-type inverter with submersible pumps, and P type for general pumps.
Solar pump control special performance	MPPT ( maximum power point tracking), CVT (constant voltage tracking), auto/manual operation, dry run protection, low stop frequency protection, minimum power input, motor maximum current protection, flow calculating, energy generated calculating.
Protection function	Phase loss protection, phase short circuit protection , ground to phase circuit protection , input and output short circuit protection. Stall protection
Protection degree	IP20, Air force cooling
Running mode	MPPT , CVT, variable frequency mode
Standard	CCC, CE, IEC