12V/24V 10A/20A/30AMP Solar Controller with MPPT+PWM Charging T10

Produktbeschreibung

12V/24V 10A MPPT+PWM Charger Solar Controller with USB and Ce T10


T10-10A / T20-20A / T30-30A / T40-40A 

This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.

Specification

ModelT10
Maximum Power Current10A
Installation Lin mm24mm2
Installation Line(AWG)10(AWG)
System load loss≤13mA
Loop Buck≤100mV
Battery float voltage13.8V 12V system /27.6V 24V system
Battery (under voltage) protection10.6V 12V system /21.2V 24V system
Battery (under voltage) recovery voltage12.6V 12V system /25.2V 24V system
Charge modeMPPT+PWM MODE
Operating Temperature-10~60°C
Storage Temperature-30~70°C
Humidity requirements≤90%,no condensation
Temperature compensation-4mV/Cell/°C
Temperature Probe (built components)NTC 100K thermistats
Maximum open circuit voltage of the solar panel18V-24V 12V system 36V-48V 24V system)
Solar panels maximum open circuit voltage (V)≤48V
The peak voltage of the solar cell panel18V-25V
Peak power of solar cell panel50W-130W
Battery standard voltage12V
Battery capacity≥100AH ≥200AH

Main Features






Application Method
System12V24V
Max PV Input Power120W240W
Max PV Input Voltage18V36V
Battery Voltage12V24V
Load Output Current10A10A
Attention
Connection Order: 
1.Connect the battery with the controller. 
2.Connect the solar panel with the controller. 
3.Connect the load with the controller or inverter. 
Disconnection order: 
1.Disconnect the solar panel. 
2.Disconnect the battery. 
3.Disconnect the load. 
Precautions: 
1.please make sure connect your inverter with your battery 
2.Please avoid to install in the following environments wet,dusty places or places with flammable and explosive gases. 
3.Install the controller at the vertical plane.

General  Pakage
 Product List
10A Solar Contorller T101 pcs
User manual1 pcs
Temperature Sensor1 pcs
Packaging Information
Size / piece
 / carton
Weight / piece
 / carton
Quantity / carton

Instructions
This is a compatible MPPT charge controller PWM intelligent / efficient / energy saving, he not only has efficient MPPT controller charging function to automatically track the maximum power point, 10% -30% higher than the ordinary controller charging efficiency, also has standby energy saving, more than 30% energy than ordinary controller, the standby power consumption of only 10mA-15mA.
LCD screen display
Battery reverse discharge protection
Easy operation interface
Battery reverse polarity protection
MPPT+ PWM charging mode
Battery under voltage protection
Parameter user can reset Overload
Short-circuit protection
A key to restore the factory settings
USB 5V charging (for 500mA) for mobile phone(Only for M30)
A key to open and close the load
Automatic temperature compensation function



 

Lieferfähigkeit

Verpackung und Versand

Vorlaufzeit:
Hafen:
Verpackungsdetails:
>=1 Stück(e)

US 14.98-17.95

Kontakt


Diese Inserate könnten Sie auchinteressieren.